Sintering and Engineered Microstructures

Messing Research Group

Recent Publications

2006

 

K. H. Brosnan, G. L. Messing, R. J. Meyer, and M. D. Vaudin. “Texture Measurements in (001) Fiber Oriented PMN-PT,” J. Am. Cer. Soc., 89 (6) 1965–1971 (2006).

 

S. H. Lee, S. Kochawattana, G. L. Messing, J. Q. Dumm, G. Quarles, and V. Castillo. “Solid-State Reactive Sintering of Transparent Polycrystalline Nd:YAG Ceramics,” J. Am. Cer. Soc., 89 (6) 1945–1950 (2006).

 

A. Mohanram, S. H. Lee, G. L. Messing, and D. J. Green. “Constrained Sintering of Low-Temperature Co-fired Ceramics,” J. Am. Cer. Soc., 89 (6) 1923–1929 (2006).

 

S. E. Schoenberg, D. J. Green, and G. L. Messing. “Effect of Green Density on the Thermomechanical Properties of a Ceramic During Sintering,” J. Am. Cer. Soc., 89 (8) 2448–2452 (2006).

 

A. Ikesue, Y. L. Aung, T. Taira, T. Kamimura, K. Yoshida, and G. L. Messing. “Progress in Ceramic Lasers,”  Annual Review of Materials Research,  36 397–429 (2006).

 

S. E. Schoenberg, D. J. Green, A. E. Segall, G. L. Messing, A. S. Grader, and P. M. Halleck. “Stresses and Distortion Due to Green Density Gradients During Densification,” J. Am. Cer. Soc., 89 (10) 3027–3033 (2006).

 

B. Jun, S. Lee, and G. L. Messing. “Synthesis of Nano-Scaled Alpha-Al₂O₃ Particles by Combustion Spray Pyrolysis,” Science of Engineering Ceramics III, 317-318 207–210 (2006).

 

2005

 

S. Kwon, E. M. Sabolsky, G. L. Messing, and S. Trolier-McKinstry. “High Strain, (001) Textured 0.675Pb(Mg_1/3Nb_2/3)O₃-0.325PbTiO₃ Ceramics: Templated Grain Growth and Piezoelectric Properties,” J. Am. Cer. Soc., 88 (2) 312–317 (2005).

 

A. Mohanram, S. H. Lee, G. L. Messing, and D. J. Green. “A Novel Use of Constrained Sintering to Determine the Viscous Poisson’s Ratio of Densifying Materials,” Acta Materialia, 53 (8) 2413–2418 (2005).

 

A. Mohanram, G. L. Messing, and D. J. Green. “Densification and Sintering Viscosity of Low-Temperature Co-fired Ceramics,” J. Am. Cer. Soc.,  88 (10) 2681–2689 (2005).

 

P. K. Sharma, G. L. Messing, and D. K. Agrawal. “Structural, Ultraviolet-Shielding, Dielectric and Ferroelectric Properties of Ba_1-xSr_xTiO₃ (x=0.35) Thin Films Prepared by Sol-Gel Method in Presence of Pyrrole,” Thin Solid Films, 491 (1-2) 204–211 (2005).

 

2004

 

A. Mohanram, G. L. Messing, and D. J. Green. “Measurement of Viscosity of Densifying Glass-Based Systems by Isothermal Cyclic Loading Dilatometry,” J. Am. Cer. Soc., 87 (2) 192–196 (2004).

 

S. Lee, T. Son, J. D. Yun, H. Kwon, G. L. Messing, and B. Jun. “Preparation of BaTiO₃ Nanoparticles by Combustion Spray Pyrolysis,” Materials Letters, 58 (22-23) 2932–2936 (2004).

 

S. H. Lee, G. L. Messing, and D. J. Green. “Warpage Evolution of Screen Printed Multilayer Ceramics During Co-Firing,” Euro Ceramics VIII, Pts 1-3, 264-268 321–328 (2004).

 

C. Duran, G. L. Messing, and S. Trolier-Mckinstry. “Molten Salt Synthesis of Anisometric Particles in the SrO-Nb₂O₅-BaO System,” Materials Research Bulletin, 39 (11) 1679–1689 (2004).

 

G. L. Messing, S. Trolier-McKinstry, E. M. Sabolsky, C. Duran, S. Kwon, B. Brahmaroutu, P. Park, H. Yilmaz, P. W. Rehrig, K. B. Eitel, E. Suvaci, M. Seabaugh, and K. S. Oh. “Templated Grain Growth of Textured Piezoelectric Ceramics,” Critical Reviews in Solid State and Materials Sciences, 29 (2) 45–96 (2004).

 

T. Fujii, H. Sato, S. Ito, and G. L. Messing. “Crystal Structure and Dielectric Properties of Complex Perovskite (Sr, Ba, Ca)(Ni_0.5W_0.5)O₃”. Solid State Ionics, 172 (1-4) 485–489 (2004).

 

2003

 

H. Yilmaz, S. Trolier-McKinstry, and G. L. Messing. “(Reactive) Templated Grain Growth of Textured Sodium Bismuth Titanate (Na_1/2Bi_1/2TiO₃-BaTiO₃) Ceramics: Dielectric and Piezoelectric Properties,” Journal of Electroceramics, 11 (3) 217–226 (2003).

 

H. Yilmaz, G. L. Messing, and S. Trolier-McKinstry. “(Reactive) Templated Grain Growth of Textured Sodium Bismuth Titanate (Na_1/2Bi_1/2TiO₃-BaTiO₃) Ceramics: Processing,” Journal of Electroceramics, 11 (3) 207–215 (2003).

 

E. M. Sabolsky, S. Trolier-McKinstry, and G. L. Messing. “Dielectric and Piezoelectric Properties of (001) Fiber-Textured 0.675Pb(Mg_1/3Nb_2/3)O₃-0.325PbTiO₃ ceramics,” Journal of Applied Physics, 93 (7) 4072–4080 (2003).

 

C. Duran, S. Trolier-McKinstry, and G. L. Messing. “Processing and Electrical Properties of 0.5Pb(Yb_1/2Nb_1/2)O₃-0.5PbTiO₃ Ceramics,” Journal of Electroceramics, 10 (1) 47–55 (2003).

 

S. H. Lee, G. L. Messing, and D. J. Green. “Bending Creep Test to Measure the Viscosity of Porous Materials During Sintering,” J. Am. Cer. Soc.,  86 (6) 877–882 (2003).